Stage Background Decorative Inflatable Mirror Ball Unique Commercial For Party

Stage Background Decorative Mirror Ball For Party Inflatable Balloon Mirror Ball

introduction listing

Inflatable Mirror Balloon , PVC Mirror Balloon , Decoration Mirror Balloon , As it’s with Reflection Effect , which is our latest products . And got a very good sale on the market now . It can be widely application for KTV , T station , bars , parties , concerts , new product launches , sports games , new store openings , festivals and other entertainment venues . It really create a great party atmosphere .

The Inflatable Mirror Balloon is essentially a PVC Beach ball , covered with small mylar squares ( mylar , as you probably already know , is that silver material sometimes used for balloons ) . The bottom of the ball has a small weight on the inside , to help keep it stable .

1) Inflation Step

• Open the valve , Connect the power of blower
• Put the entrance of the blower insert the valve
• Turn on the blower
• Close the valve when the balloon filled with air
• Must be pay more attention about the valves , must be open it and twist the inside sticks, then can connect the air pump and inflate. Deflate is same way .

2) Hang it , fasten it or flew up into the sky

It is your choice : hang it on the floor , fix it on the grassland or fasten it to the anchor on the

bank with ropes or blow it up with helium . If put on the ground , often need to make sang bags

or water bags to keep weight .

3) How to maintain and storage ?

• Disinfect and clean the balloon regularly .
• Check the ball before using . Any damage , please mend it with our repairing kit and glue .
• After use , please remove sundries outside and inside the ball .
• Before packing , make sure the ball is clean and dry . Then store it in cool and dry place .

4) How to clean it when it is dusty after use ?

Soft and clean cloth by hand , never use hot water and hard brush , they will damage the mirror

material .

5) How to repair ?

• Cut small piece down first from repair material .
• Glue it and the broken part
• Put on the broken part when dying to dry .
• Press tightly.

Image